Skip to Main Content
The online publications platform for American Nuclear Society members.
162
Views
2
CrossRef citations to date
0
Altmetric
Technical Papers

Transitioning to a Sustainable Thorium Fuel Cycle in Pressurized Water Reactors Using Bimetallic Thorium-Zirconium Alloy Cladding

ORCID Icon
Pages 1793-1809 | Received 08 Jul 2020, Accepted 03 Nov 2020, Published online: 29 Mar 2021
 

Abstract

Although η, the number of neutrons released per neutron absorbed in a 232Th-233U (thorium) fuel cycle, is greater than 2 in the thermal spectrum and therefore the possibility of breeding in a water-moderated reactor exists, it has been found difficult to achieve in practice. It is useful to relax the constraint for breeding and examine a thorium cycle for pressurized water reactors PWRs, denoted as PWR-Th, with the provision that the shortfall be made up by 233U bred in a PWR operating on a uranium fuel cycle, denoted as PWR-U, both of which utilize bimetallic thorium-zirconium alloy cladding as part of the fuel rod design. The number of complementary PWRs that could be sustainably operated on a thorium cycle was seen to critically depend on the moderator-to-fuel ratio (MF). Detailed cycle-by-cycle analysis shows that at the end of the first cycle, the sustainability ratio, namely, the ratio of sustainable PWR-Th reactors to PWR-U reactors, is 1.07 at an MF of 1.91, 1.4 at an MF of 1.43, and 4.45 at an MF of 0.954. The shortfall in 233U was found to decrease continually in subsequent cycles with the sustainability ratio increasing to 1.45, 2.01, and 28.3 at the respective MF values of 1.91, 1.43, and 0.954 by the 25th cycle. Although the sustainability ratio increases with lower MF, the achievable discharge exposure decreases necessitating larger material throughput in reprocessing. Detailed evaluations for fuel thermal, mechanical performance and nuclear reactivity feedback parameters require a further narrowing of potential design parameters based on holistic considerations arising from reprocessing. The PWR-Th reactors generate only trace amounts of transuranic (TRU) waste, and combined with a PWR-U design with bimetallic thorium cladding that generates only a fourth of the TRU waste compared to the standard all-UO2 fuel cycle, a significant reduction in TRU waste is possible.

Acknowledgments

This work is a result of independent, unsponsored research. As with the companion paper on thorium utilization in a uranium cycle PWR, the author would like to express his thanks to innumerable colleagues who have given freely of their ideas over the past four decades during which he has been involved in the development of nuclear fuel.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.